. . . . if saw filter part number package application last modified 820-if120.0m-c 20.2 x 12.6mm if saw filter apr 18, 2007 type : 120.0 mhz if saw filter part number : 820-if120.0m-c operating conditions / el ectrical characteristics parameters minimum typical maximum units center frequency (fo) 119.94 120.0 120.06 mhz insertion loss at fo - 22.2 24.0 db source impedance (single ended)* - 50 - ohm load impedance (single ended)* - 50 - ohm bandwidth at -1.0 db - 19.95 - mhz bandwidth at -3.0 db 20.25 20.35 - mhz bandwidth at -35.0 db - 21.70 - mhz bandwidth at -40.0 db - 21.80 22.0 mhz amplitude ripple - 0.75 1.0 dbp-p ultimate rejection 50 55 - db group delay variation - 50 100 nsec absolute delay at fo - 2.2 - sec temperature coefficient - -72 - ppm/c *with matching network (reference testing environment ci rcuit as shown) modify impedance values as necessary. package outline (mm)
crystal oscillators | quartz crystal | tcxo | vcxo | if saw filter | rf saw filter | ceramic resonator crystal filter | ceramic filter | saw filter / saw devices | site map pin descriptions in-1, out-5, ground-2,3,4,6 testing environment frequency response part no.: 820-if120.0m-c
|